A window for every part of the house
Every window in the Ascot range is manufactured in the UK to your exact opening sizes, glazed as standard with a 28mm double-glazed sealed unit, and finished in a foil colour of your choice. Whether you're replacing a single window or renovating a whole elevation, our own surveyors measure, order and fit everything in-house — nothing is subcontracted.
Choose your style
Two core ranges, with dozens of colour and glazing combinations.
Built to cut heat loss, not corners
Every frame is reinforced, multi-chambered uPVC (or a timber-alternative profile for flush sash) holding a 28mm double-glazed unit with soft-coat Low-E glass, argon gas fill and a warm-edge spacer bar. Standard windows achieve a U-value of 1.4 W/m²K, dropping to 1.2 W/m²K with our upgraded glazing pack — comfortably inside Building Regulations Part L, and a genuine difference on your heating bills.
Common questions about our windows
Our standard 28mm double-glazed units achieve a U-value of 1.4 W/m²K. Upgrading to our Low-E soft-coat glazing pack with argon fill brings this down to 1.2 W/m²K, and a 44mm triple-glazed unit is available on request for as low as 0.8 W/m²K.
Every window is available in a foil-wrapped finish, including Anthracite Grey (RAL 7016), Chartwell Green, Black, Cream and a range of woodgrain effects. You can also specify a different colour inside and out at no extra cost.
Casement windows can be top-hung, side-hung or fully reversible for easy cleaning from inside, with fixed lights available for larger openings. Flush sash windows open in the traditional side-hung style, with a slim, flush-fitting sash.
Every window is fitted with multi-point shootbolt locking as standard and is tested to the PAS 24 security standard. Secured by Design certified hardware is available as an upgrade.

